When you have a lot of kitchen gadgets and gadgets of different sizes, it can be tricky to find a way to keep them all organized. The most logical solution? Get rid of all those extra drawers, and install sliding drawers instead! But which kind of slides should you have? And how can you make them work for you in the most efficient way? Here’s everything you need to know about how to remove kitchen drawers with bottom slides, from pros to mistakes you should avoid.
Pull The Kitchen Drawer Open Until The Guides Are Fully Extended
The first step you need to do when installing kitchen drawers with bottom slides is to make sure both the slides and the drawer guides are fully extended. So, pull on the drawer until the guides are fully extended and the drawer is on its full extension.
Now that you have the correct position, you can install the kitchen drawer and begin to arrange the items you want to store. There are a couple of things you need to keep in mind when installing a bottom slide. The first thing is to make sure you install the slides the correct way. You’ll need to install the slides inside the drawer, so they must go in the opposite direction of the drawer. The other thing to keep in mind is to line up the guides with the sides of the drawer. For example, to install a bottom slide in a deep drawer, it’s best to line up the guides with the sides of the drawer.
Place The Kitchen Drawer On A Counter Or On The Floor
The first thing to consider when installing bottom drawers is the surface you’ll be putting them on. If you have a counter or a large table, you can easily install a bottom drawer there. If you’re installing a drawer on a smaller surface, though, you may want to consider putting it on the floor. That way, you can easily slide it across the floor (without worrying about it breaking, of course). However, if you plan to use a big table or counter, it’s best to put the kitchen drawer with bottom slides on the floor, since it’s just more secure.
Inspect Kitchen Drawer For Release Mechanism
One of the most important things is to inspect the bottom of the cookhouse cabinet that you’ll be putting on the bottom slides. You don’t have to do it before you begin your installation, but it’s smart to do so, so you know exactly what you’re dealing with. You should find out what kind of release mechanism the drawer has. That way, you can make sure you’re using the right kind of slides.
Place Your Thumbs On The Release Levers
The next step is to place your thumbs on the release levers and then shut down the slide. There are two levers you need to pay attention to. The left lever is the one you will use to shut down the drawer, while the right lever you’ll use to open the drawer. By placing your thumbs on the correct levers, you can shut down the drawer quickly and easily. You’ll also notice that the levers are attached to the sides of the drawer, instead of the front. This is because the drawer must be shut down, even if there is something inside it.
Look Closely At The Kitchen Drawer Locate
When you locate the front of the cookhouse cabinet with bottom slides, you’ll see two holes with a lever on each side. This is the mechanism that allows you to open and close the drawer. The holes are on both sides of a drawer, so you’ll have to adjust your hand so you can access both of them.
If you notice, there are also two black knobs on each side. These are commonly referred to as the “safety levers”. These safety levers are there to prevent the drawer from opening too far, which could cause items inside the drawer to fall out.
You can now worry less about safety and more about finding the items inside your drawer. The most effective way to do this is to use your hands. Reach into the drawer and grab whatever you want to grab.
One thing to keep in mind is that the drawer will not open all the way. Even if you want it to, it won’t. Fortunately, there is a solution to this.
Look For A Kitchen Drawer Pull-out Guard
Another thing you can do to avoid damaging the bottom slide is to get a cookhouse cabinet pull-out guard. These are commonly referred to as “protectors”, and they’re specifically designed to go over the bottom slides of kitchen drawers. The best part about a pull-out guard is that it protects both the edges and the slides of the drawer.
If you don’t have a second drawer that you can use to create a pull-out guard, there are a couple of things you can do to protect the bottom slide of your kitchen drawer. One option is to put a rubber mat or a piece of cardboard in the bottom drawer. This can not only protect the bottom slide but also keep items from sliding around and causing damage to other kitchen items.
Place One Hand On Each Side Of The Kitchen
Now that you’ve located the front of the drawer and the two handles on each side, you can use one hand to gently shut down the slide. This will prevent the slide from getting damaged. If you want to open the drawer all the way, you can use the other hand to do so.
Alternatively, you can also use a step stool or a stool that comes with a drawer pull-out to get closer to the bottom slide of your cookhouse cabinet. There are a couple of options for you, depending on the kind of kitchen drawers you have.
If you have a single-shelf kitchen drawer, you can simply place one hand on either side of the drawer, as we mentioned before. Shut down the slide, and then gently pull down on the front of the drawer to open it all the way.
Gently Shut Down The Slide
Inspecting the bottom of the cookhouse cabinet with bottom slides is important for another reason. While you can usually shut down a drawer by pressing it down, some drawers will have a mechanism that will let you gently shut them down, so you won’t damage the mechanism or tear it up. That’s why you should inspect the bottom of the drawer, to make sure it has a mechanism you can shut down with ease.
Time For Some Pressure To The Kitchen
Now that you’ve opened your drawer, you’ll need to place some pressure against the drawer to fully close it. To do this, you’ll need to use one hand to shut down the slide, and the other hand to push down on the drawer to close it.
There is a difference between closing the drawer and closing the slide. If you’re closing the drawer, you can gently shut down the slide, and then let go. If you’re closing the drawer, you need to be careful that you don’t shut down the slide, and then push down on the drawer to close it.
Unfortunately, there is no ideal solution to this problem. The best we can do is to find a way to make your drawer work as effectively as possible.
Try Another To Make Kitchen Drawers With Slides
Another way to make your cookhouse cabinet slide less is to switch out the slides of the drawer. While this won’t solve your overall problem, it will reduce the amount of pressure on the drawer’s slide.
One drawer slide may not be enough to safely carry all the items you put inside the drawer. If your drawer has a lot of items, it may be time to switch out the drawer slides to see if it has any sort of improvement.
Another solution you can try is to install a soft-close drawer slide. These are a type of drawer slide that has rubber tracks that make it much easier to shut down a drawer. The rubber tracks make it easier to shut down the drawer, which in turn reduces the amount of pressure that the drawer is under.
Final Thought
We can’t emphasize how important it is to inspect the bottom of your cookhouse cabinet with bottom slides before you begin your installation. You can shut down the drawer with a release mechanism, and if you don’t, you can damage the drawer or tear up your floor. So, make sure you find out if the drawer has a mechanism you can shut down, and find one that’s compatible with your type of slides.
